Quick Network Setup - Eneo IPB-72A0003M0A Mode D'emploi

Quick Network Setup

1. After the camera is connected to the network, start 'eneo Scan Device' tool (en-
closed CD).
2. Use the 'Scan eneo' button to find the camera in your network.
3. By default the camera is set to DHCP. If there is no DHCP server present in the net-
work the camera will fall back to a default IP address after a while. In this scenario
please only add one camera at a time to the network to avoid conflicts due to
identical IP addresses.
The network camera's default IP address is: 192.168.1.10.
4. Right clicking the device name in the eneo Scan Device tool will bring up the
context menu. Use the 'Open Device Web Site' option to access the camera.
5. The web viewer login page will open up in your default web browser.
In case of Microsoft Internet Explorer install Active-X named VIDEOR E. Hartig
GmbH according to the instruction at the bottom of the browser.
6. Use the default user name and password to log in.
Default user name: admin
Default password: admin
EN
11