Network Setup; Accessing The Camera - Eneo PTB-1008F Serie Mode D'emploi

Accessing the camera

The camera's default IP address is: 192.168.1.10. Therefore, to access the
camera for the first time, set the PC's IP address as: 192.168.1.XXX; for
example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
• Enter the camera's IP address in the URL bar of the Web browser win-
dow and hit "Enter."
• Enter the default user name (root) and password (root) in the prompt
request dialogue.
It is also possible to reset IP parameters to the original factory default
settings by pressing the IP reset switch located next to the video sub-out
connector for 10 seconds.
Inclination limited to +/-90° max.

Network setup

23
DE
EN
FR
PL
RU