mundoclima MUSER-12-H12 Manuel D'installation page 59

6. Once all the functions required have been added, press the Save button in the top right
corner to finalise and save your new Scene.
AUTOMATION
Automation allows an automatic action to be set up for the device. This can be triggered by the
time, indoor temperature, humidity of the room, weather conditions, and a range of other
influences.
1. Press on the Smart Scene tab at
the bottom of the Home screen.
2. Press on the Plus in the top right
corner to add a smart scene.
4. Setup is very similar to the scene setup
on the previous page, and includes an
extra section for specifying a trigger for
the scene to start.
Press the arrow next to "Name" to input
the name for your Scene
Show on Home Page: Leave this on if
you require the scene to be displayed
as a button on the Home Screen
Press the Blue Plus to add the action
required. Then select the air
conditioner from the list of devices.
59
3. Press on the Launch Tap‐to‐Run
to create a new Scene.
Chose the function, set the
5.
value for the function, and then
press the arrow button in the
top left corner, to return to the
previous screen.