mundoclima MUSER-12-H12 Manuel D'installation page 50

FUNCTIONS
Press "POWER" to turn the unit On or Off.
POWER
Press to change between the 4 different modes. The display will show the symbol for the mode
currently selected.
COOLING
DRY
MODE
FAN
HEATING
SILENT
FAN SPEED
The air conditioner contains a 24 hour timer, which can be used to either set a delayed start, or a
set period of operation.
SHUTDOWN TIMER:
While the unit is running press the timer button, the display will flash "0" 5 times. After the 5th
flash, use the up and down buttons to adjust the duration in 1 hour increments between 1 to 24
hours. When the timer has elapsed, the unit will shutdown automatically.
TIMER
DELAYED START TIMER:
With the unit in standby, press the timer button, the display will flash "0" 5 times. After the 5th
flash, use the up and down buttons to adjust the duration in 1 hour increments between 1 to 24
hours. After the timer has elapsed, the unit will start up in the same mode with the same settings
as when it was turned off.
Used within cooling and heating modes to adjust the desired temperature 16‐30°C. Also
used while setting the timer to adjust the duration.
INCREASE AND
DECREASE
After machine turns on, press the "SWING" button, louver will swing continuously up and down;
SWING
by pressing the button again the movement will stop and the louver remain in that position.
MODE
Swing mode can only be adjusted from the remote, and will initially be turned on by default. The
louver will close automatic once switch OFF the product.
The cooling function allows the air conditioner to cool the room and at the same
time reduces air humidity. The desired temperature can be adjusted using the
increase and decrease button between 16°C and 30°C. The fan speed can also be
adjusted using the speed button.
Dry mode will extract moisture from the air, which will be drained outside using th
e installed drain pipe. The fan speed
cannot be adjusted in dry mode.
In fan mode the appliance will recirculate the air within the room, and will not cool,
heat or dehumidify. The fan speed can be adjusted using the Speed button, But the
desired temperature can not be set.
The heating function allows the air conditioner to heat the room.The desired
temperature can be adjusted using the increase and decrease button between 16°C
and 30°C. The fan speed can also be adjusted using the speed button.
Silent mode can be activated from APP or the remote control, It can also be
activated by pressing "
operate in cooling or heating modes, the fan speed will change to low and noise will
be lower.
Press to change the fan speed between Low, Medium and High. The fan speed
cannot be adjusted in Dry or Silent modes.
"+" " on unit control panel at the same time. It will only
50