82 www.aeg.com
CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
CLEANING THE FILTERS
C
B
CLEANING THE SPRAY ARMS
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
EXTERNAL CLEANING
Clean the appliance with a moist soft
cloth.
All manuals and user guides at all-guides.com
C
A
A1
A2
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
1.
Turn the filter (A) counter-
clockwise and remove it.
2.
To disassemble the filter (A),
pull apart (A1) and (A2).
3.
Remove the filter (B).
4.
Wash the filters with water.
5.
Put the filter (B) to its initial po-
sition. Make sure that it assem-
bles correctly under the two
guides (C).
6.
Assemble the filter (A) and put
it into position in filter (B). Turn
it clockwise until it locks.
An incorrect position of the
filters can cause bad wash-
ing results and damage to
the appliance.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.