Publicité
Les langues disponibles
Les langues disponibles
Dialling pause
When using private branch exchanges, it is necessary
to dial an access code to obtain the dialling tone for an
outside line. When using some older private branch ex-
changes, it takes a little time before the dialling tone
becomes audible. In the case of such private branch
exchanges, a dialling pause can be inserted after the
number for an outside line in order to continue dialling
directly without having to wait for the dialling tone.
Press the Dialling Pause button (9) to insert a dialling
pause of approx. 3 seconds.
Setting the ringing volume
The ringing volume is changed using the slide con-
trol (11) on the underside of the unit. There are 2 set-
tings: loud (large symbol) and quiet (small symbol).
Move the slide control (11) to the required position.
6 In Case of Problems
Problems and solutions
Problems
No telephone
calls possible
Telephone
number is not
dialled
Service hotline
In the case of technical problems, you can contact our
hotline service, Tel. 0900 00 1675 within Switzerland
(Swisscom fees at time of going to print:
CHF 2.60/min). In the case of claims under the terms of
guarantee, please contact your sales outlet. There is a
2 year period of guarantee.
24
Solutions
− The telephone line is not con-
nected properly or is defective.
Connect the phone again.
Only use the connection cable
supplied.
− Connect a different phone. If
telephoning is still not poss-
ible, the telephone connection
is probably defective.
− Press the buttons sufficiently
hard so that you hear an
acoustic signal each time a
button is pressed.
G
Publicité
