ABB TTF300 Note De Mise En Exploitation page 47

3.1.2 Pipe installation
Fig. 3
1 Pipe
2 Pipe mount TTF300
1. Locate an installation site on a pipe close to the temperature sensor head.
Important
The pipe mount can be attached to a pipe with a maximum diameter of 2.5 inch.
2. Screw the transmitter to the pipe mount.
3 Attach the pipe mount securely to the pipe with 2 pipe clamps (∅ 10 mm).
CI/TTF300-X1
1
TTF300
2
3 Transmitter
Mounting
3
A00088
EN - 11