Adler DWA2050 Guide Rapide page 15

1- Open the door.
2- Add recommended quantity of detergent
inside the tank – only models without
automatic dispenser included – (see par.
3B2)
3- Insert dirty loaded dishes basket and close
the door.
4- Press one of the available cycles between
button "C", "D" or "E". (Fig.15)
E-D-C
Fig.15
5- Press button "B" start washing cycle. (Fig.16)
B
Fig.16
6- Wait until is displayed "END" cycle finished,
open the door and download clean dishes
basket. (Fig.17)
Fig.17
- During washing cycle GREEN light indicator is
blinking on button "B" and time remaining is
displayed.
- If during this process door is opened,
washing cycle is interrupted and "CLOSE DOOR"
is displayed. To start a new cycle press button "B"
start cycle.
N.B.
The machine is equipped with different
washing cycles, from 1 to 3. If available, use
button "C" short cycle for light dirty dishes.
Button "D" medium cycle for medium dirty
dishes. Button "E" long cycle for very dirty
dishes.
3B4 – AUTOMATIC WASHING CYCLE
(Hoodtype machines only)
Machines with automatic washing cycle have
the possibility to perform an automatic
washing cycle by simply closing the door of
the machine.
1- Press button "K" to select automatic
washing cycle. (Fig.18)
K
Fig.18
2- Close the door. Whenever closing the
door, the washing cycle will start
automatically.
- First cycle must be started by pressing
button "B" start washing cycle. All other
cycles will be automatic.
3B5 – CONTINUOUS WASHING CYCLE
(Hoodtype machines only)
Machines with continuous washing cycle
have the possibility to perform one washing
cycles for long time period such as 10min
maximum per cycle.
1- Press button "R" to select continuous
washing cycle. (Fig.19)
R
Fig.19
2- Close the door and press button "B" start
washing cycle.
3- Press again button "R" to stop continuous
washing cycle whenever is preferred.
- This option is recommended as prewashing
cycle when the dishes are very dirty.
14