Adler DWA2050 Guide Rapide page 19

2- Press button "H" continuous manual washing
cycle again to stop the performance.
N.B.
It is recommended using this option only to
prewash heavy dirty dishes. Continuous
manual washing cycle do not performs any
sort of final rinse.
WARNING!
THE APPLIANCE WILL NOT REMOVE BURNT
FOOD DEPOSITS FROM DISHES. DISHES WITH
BURNT-ON FOOD DEPOSITS SHOULD BE
CLEANED MECHANICALLY/CHEMICALLY (FOR
EXAMPLE, PRE-WASH
WATER) BEFORE PUTTING THEM IN THE
DISHWASHER.
THE USE OF "FOAMING" AND NOT SPECIFIC
DETERGENTS OR IN ANY CASE DETERGENTS
USED IN DIFFERENT WAYS FROM THAT
PRESCRIBED BY THE MANUFACTURER OR
FAILURE TO REMOVE THE RESIDUALS OF
DETERGENT POSSIBLY USED FOR MANUAL
PREWASH CAN CAUSE MALFUNCTIONING OF
THE DISHWASHER
WASHING RESULTS.
3C8 – STANDARD LOADING RACKS
1- Load plates in frontal position. (Fig.34)
Fig.34
2- Load glasses and bowls in upside down
position. (Fig.35)
Fig.35
3- Load cutlery vertically inside its containers.
(Fig.36)
Fig.36
UNDER RUNNING
AND COMPROMISE
Load rack machine with dishes as
4-
described on the figure.
For undercounter models load the rack
front side. For hoodtype models load the
rack front side or sideways (if necessary
switch rack support clockwise). (Fig.37)
Fig.37
18