Starting / Wash Cycles (Electronic Version) - Adler DWA2050 Guide Rapide

3B - STARTING / WASH CYCLES
(ELECTRONIC version)
CONTROL PANEL
LEGENDA
A = On/Off
B = Start Washing Cycle
C = Short Washing Cycle
D = Medium Washing Cycle
E = Long Washing Cycle
F = Final Cold Rinse Cycle
G = Drain Water Tank
H = Regeneration/Autocleanning
I = Washing Temperature Indicator
L = Rinse Temperature Indicator
Q = Display
K = Automatic Washing Cycle
R = Continuous Washing Cycle
N.B.
The control panel represented above is full version.
Some versions may have not all the indicated functions.
3B1 – STARTING THE MACHINE
1- Open the door and verify that all internal
components, water flow device included,
are in the correct position. (Fig.12)
Fig.12
2- Open main water supply cock.
3- Switch on at the mains.
4- Close the door and press button "A" to turn
ON the machine. (Fig.13)
A
Fig.13
- During water filling process is
displayed "FILL". (Fig.14)
Fig.14
- If during this process door is
opened, is displayed "CLOSE DOOR".
Consequently close the door.
- During filling and water heating
process AMBER indicator light is
visualized on button "B".
- After water heating process is
finished and the temperature is
reached, GREEN indicator light is
visualized on button "B" machine
READY to use.
3B2 – DETERGENT FILLING
PROCESS (versions without
automatic detergent pump only)
Glasswasher Models:
- Begin filling the tank with 3
detergent spoons and 1 spoon in
betwenn 2/3 washing cycles.
Dishwasher Models:
- Begin filling the tank with 5/6
detergent spoons and 1 spoon in
between 2/3 washing cycles.
N.B.
All dishwashers are pre-set for
electrical connection of external
automatic detergent pump or
automatic detergent pump kit
through the injector and related
tube or by the hole located on the
back tank of the machine.
THIS MODIFICATION, IF REQUIRED,
MUST BE CARRIED
QUALIFIED TECHNICIAN ONLY.
3B3 – WASHING CYCLE
The wash cycle includes one wash
with hot water and detergent at 60°C
(140°F) and one rinse cycle with hot
water and rinse aid at 85°C (185°F).
When the machine reaches the
correct temperature and it is ready to
start a new cycle, GREEN indicator
light is visualized on button "B", then:
(next page)
OUT BY
13