eufy Security 910834 Guide De Démarrage Rapide page 6

NOTICE
This product complies with the radio interference requirements of the European
Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU.For the
declaration of conformity, visit the Web site: https:/ /uk.eufylife.com
This product complies with the radio interference requirements of the United
Kingdom
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this device is in compliance with Radio
Equipment Regulations 2017(SI 2017/1206). The full text of the UK declaration of
conformity is available at the following internet address: https:/ /uk.eufylife.com
The adapter shall be installed near the equipment and shall be easily accessible. Do not use
the Device in the environment at too high or too low temperature, never expose the Device
under strong sunshine or too wet environment. The suitable temperature for the device
and accessories is -20°C to 50°C (Charging temperature is 0°C to 40°C).
When supplying, please place the device in an environment that has a normal room
temperature and good ventilation.
It is recommended to supply the device in an environment with a temperature that ranges
from 5°C~25°C.
Warning:
– replacement of a battery with an incorrect type that can defeat a safeguard;
– disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a
battery, that can result in an explosion;
– leaving a battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; and
– a battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
07 EN
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
RF exposure information:
The Maximum Permissible Exposure (MPE) level has been calculated based on a distance
of d=20 cm between the device and the human body. To maintain compliance with RF
exposure requirement, use product that maintain a 20cm distance between the device and
human body.
LTE Frequency bands and power as below:
Function Bands
Ⅰ
WCDMA
Ⅷ
1
3
7
8
LTE
20
28A
38
40
The following importer is the responsible party (contract for EU matters)
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse 3, 80807 Munich, Germany
The following importer is the responsible party (contract for UK matters)
Anker Technology (UK) Limited I GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17
1HP, United Kingdom
Your product is designed and manufactured with high quality materials and
components, which can be recycled and reused.
This symbol means the product must not be discarded as household waste, and
should be delivered to an appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human health and the environment.
For more information on disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you bought this product.
Operation Frequency Max.Power
1920-1980MHz 25.7 dBm
880-915MHz 25.7 dBm
1920-1980MHz 25.7 dBm
1710-1785MHz 25.7 dBm
2500-2570MHz 25.7 dBm
880-915MHz 25.7 dBm
832-862MHz 25.7 dBm
703-733MHz 25.7 dBm
2570-2620MHz 25.7 dBm
2300-2400MHz 25.7 dBm
EN 08