Publicité
Les langues disponibles
Les langues disponibles
8130239
WARNING! Only qualified service personnel should repair the tool. An improperly repaired tool may present a
hazard to the user and/or others.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not function properly or parts are missing. If unable to do
so, have a qualified technician service the tool.
Problem(s)
Blade
Motor Stops Suddenly
Excessive Rocking
or Vibration
Pump Fails
Visit www.princessauto.com for more information
10 in. Wet Tile Saw with Stand
Possible Cause(s)
Overheating
Slow Rotation
Electricity interrupted
Loose or Broken Parts
Tool is Not Level
Plugged
Broken
Blockage
Suggested Solution(s)
Ensure blade has a continuous supply of water, if
low, stop and refill.
You are Forcing the Tile. Push the tile slower
Turn to OFF Position, Wait 15 Seconds and Then
Press the Re-Set Button
Contact Princess Auto Ltd. to Replace or Repair.
To Prevent excessive noise and vibration, the saw
and stand must be on firm, dry, level ground.
Remove debris from the Pump's intake hole.
This item cannot be fixed. If this is the issue, this
must be replaced. Contact a representative from
Princess Auto.
Check the pump discharge and tubing for kinks and
obstructions. Debris build up can be flushed out
with a garden hose.
V 3.04
9
Publicité
