Publicité
Les langues disponibles
Les langues disponibles
V 3.04
10 in. Wet Tile Saw
with Stand
SPECIFICATIONS
Overall Dimensions (Saw Only)
Table Dimensions
Water Tray Dimensions
Cut Capacity
Blade Specification
Motor Specification
Pump Maximum Flow
Net Weight
SAFETY
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a
possibility of property damage, injury or death if certain instructions are not followed.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal
injury or death if the proper precautions are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or property
damage, but not personal injury.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean, well lit and free of distractions.
2. Keep anyone not wearing the appropriate safety equipment away from the work area.
3. Store tools properly in a safe and dry location. Keep tools out of the reach of children.
2
43 L x 21 W x 20 in. H (without stand)
16 x 11 in.
37-1/2 x 18-1/2 x 3 in. (outside)
Rip
24 in.
Depth
3 in.
Type
10 in. Continuous Rim Blade
Arbor
5/8 in.
120V ,60 Hz, 15A
2.5 HP, 1 Phase, 3,450 RPM
10 to 12 Litres per Minute
97 lb (44 kg)
For technical questions call 1-800-665-8685
8130239
Publicité
