Publicité
Les langues disponibles
Les langues disponibles
8130239
3. Keep all connections dry and off the ground to reduce the risk of electric shock. Do not touch plug with
wet hands.
4. Prevent damage to the power cord by observing the following:
a. Never use the cord to carry the tool.
b. Do not pull on the cord to disconnect the plug from an outlet.
c. Keep the power cord clear of the tool and the tool's work path while in operation. The cord should
always stay behind the tool.
d. Keep cord away from heat, oil, sharp edges or moving parts.
5. Do not allow people, mobile equipment or vehicles to pass over unprotected power cords.
a. Position power cords away from traffic areas.
b. Place cords in reinforced conduits.
c. Place planks on either side of the power cord to create a protective trench.
6. Do not wrap cord around tool as sharp edges may cut insulation or cause cracks if wound too tight. Gently
coil cord and either hang on a hook or fasten with a device to keep cord together during storage.
PUMP PRECAUTIONS
1. Always disconnect from electrical outlet before handling the pump.
2. Do not let the pump run dry.
3. Do not carry the pump by the power cord.
4. Do not pump heated liquids.
5. Operate pump completely submerged for proper cooling.
Water Cooling Precautions
NOTICE! Never cut without engaging the water supply. To prevent excessive wear on the blade, be sure to
maintain a continuous flow of water over the blade during operation.
Water supplied to the cutting blade may spatter and collect on the ground, creating an electrical hazard.
1. Cut tile at a location away from other electrical devices and power supplies when possible.
2. Protect electrical devices, power and extension cords and power supplies from water spray and
puddles at all times.
3. Ensure the tool's power supply cord plug is protected from water produced during operation.
Vibration Precautions
1. This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or
permanent physical injury, particularly to the hands, arms and shoulders.
2. Anyone using vibrating tools regularly or for an extended period should first be examined by a doctor and
then have regular medical check ups to ensure medical problems are not being caused by or worsened
from tool use.
3. If you feel any medical symptoms related to vibrations (such as tingling, numbness, and white or blue
fingers), seek medical attention as soon as possible.
4. DO NOT use this tool if one of the following applies:
a. Pregnant
b. Impaired blood circulation to the hands
c. Past hand injuries
d. Nervous system disorders
e. Diabetes
f. Raynaud's Disease
5. Do not smoke while operating the tool. Nicotine reduces the blood flow to the hands and fingers,
increasing the risk of vibration-related injury.
6. Wear suitable gloves to reduce the effects of vibration.
7. Use the tool with the least amount of vibration, when there is a choice between different processes.
Visit www.princessauto.com for more information
10 in. Wet Tile Saw with Stand
V 3.04
5
Publicité
