How To; Battery Indicator; What The Lights Mean; Using The Jabra Bt 5020 With 2 Mobile Phones - Jabra BT 5020 Mode D'emploi

6. How to...

US
Answer a call
ES
• Tap the answer/end button on your headset to answer a call.
End a call
PT • Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
FR
phone settings) automatically transfer to your headset. If your phone does
not allow this feature, tap on the Jabra BT5020's answer/end button to
transfer the call to the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming
call. Depending on your phone settings, the person who called you will
either be forwarded to your voice mail or hear a busy signal.
Activate voice dialling*
• Press the answer/end button. For best results, record the voice-dialling tag
through your headset. Please consult your phone's user manual for more
information about using this feature.
Redial last number*
• Double Tap the answer/end button when the headset is on and not used.
Adjust sound and volume
• Press the volume up or down to adjust the volume.
Mute an ongoing call
• To mute an ongoing call, press both volume up and down at the same time
low beep alert plays during a muted call.
• To un-mute tap either of the volume buttons
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and
answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.
* Functions marked with * are dependent on your phone supporting these
features. Check your phone's user manual for further information.

7. Battery Indicator

When the Jabra BT5020 is turned on or a button is pressed more than 1 minute
after last button press, the LED indicator the battery level of the headset.
2 Green flashes = 20% - 100% Charged
2 Yellow flashes = 10% - 20% charged
2 Red flashes = Less than 10% charged


8. What the lights mean

What you see
2 coloured flashes
Flashing blue and green light
Flashing blue light
Flashing blue light
Flashing red light
Solid green light
Solid red light
Solid blue light

9. Using the Jabra BT 5020 with 2 mobile phones

Jabra BT5020 is capable of having two mobile phones connected to the
headset at the same time. This will give you the freedom of having only
headset to operate both your mobile phones and the operation of the
functions in the headset functions as described in section 6.
Only it must observed that Last Number Redial will dial the number from the
last outgoing call, independent of the mobile phones, and the Voice Dialling
function only will work on the last paired mobile phone.
Jabra BT 5020 Bluetooth headset
What is the mean about you
See Battery indicator (section 7)
Incoming call
Flashing every second: active call
Flashing every three seconds: in
standby mode (only for 1 minute
then off)
Running low on battery
Fully charged
Charging
In pairing mode – see section 4
US
ES
PT
FR