• Never move your hands or feet toward or under any
rotating parts. Keep clear of the chute opening at
all times.
• Never lift or carry a lawn mower with the engine
running.
• Switch off the engine and pull the spark plug boot
and make sure that all moving parts have come to
a standstill:
- before you dislodge any blockages or clogs in
the chute.
- before carrying out any checks, cleaning, main-
tenance or other work on the lawn mower
- if the lawn mower strikes a foreign body, ex-
amine it for signs of damage and carry out any
necessary repairs before restarting and continu-
ing to work with the mower. If the lawn mower
begins to experience exceptionally strong vibra-
tions, immediately switch it off and check it.
• Switch off the engine:
- when you leave the lawn mower.
- before you refuel.
• Operation of the machine at higher than normal
speed can lead to an increased risk of accidents.
• Take care when carrying out installation work on
the machine, and avoid trapping fingers between
the moving cutting tool and the fixed parts of the
machine.
• Please be particularly careful when mowing on
ground that may subside, on nearby landfills,
trenches and embankments.
• The user must be adequately trained in the use,
adjustment and operation of the machine (including
prohibited operations).
• Check the machine regularly and ensure that all
start locks and push buttons are working properly
before each use.
• Please note that improper maintenance, the use of
inappropriate spare parts, or the removal or modifi-
cation of safety devices can result in damage to the
machine and serious injury to the person working
with it.
• Please note that the lawnmower's safety systems
or devices must not be manipulated or deactivated.
• Please note that the user must not change or ma-
nipulate any sealed engine speed control settings.
• Only use cutting equipment and accessories rec-
ommended by the manufacturer. The use of other
tools and accessories may result in injury to the
operator.
• Always keep the lawnmower in good operating con-
dition.
• It is necessary to take enough breaks to reduce
noise and vibration exposure.
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
Residual risks and accident prevention stand-
ards
Neglect of ergonomic principles
Negligent handling of personal protective equip-
ment (PPE)
Negligent handling or ommission of the personal pro-
tective equipment may cause serious injuries.
- Wear prescribed personal protection equipment.
Human behaviour, misbehaviour
- For any work be fully concentrated.
m Residual risks - Cannot be entirely excluded.
Danger from noise
hearing damage
Prelonged unprotected work with the device may
cause hearing damage.
- Always wear ear-muffs.
In case of emergency
In case of a possibly occuring accident take the nec-
essary first aid steps as appropriate and obtain quali-
fied medical aid as quickly as possible.
6. Technical data
Type engine
four stroke engine/air cooled
Cubic capacity
Rotation speed
Max. engine output
kW
Regular grade petrol/lead-
Fuel
Capacity tank
Motor oil
Capacity tank/oil
Cutting height
adjustment
Collection bag
capacity
Cutting width
Weight
Subject to technical changes!
Information concerning noise emission measured ac-
cording to relevant standards:
Sound pressure L
= 82,0 dB(A)
pA
Uncertainty K
= 3,0 dB(A)
PA
Sound power L
= 93,1 dB(A)
WA
Uncertainty K
= 2,35 dB(A)
PA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Vibration A
(left/right) = 7,38 m/s
hv
Uncertainty K
= 1,5 m/s
2
PA
161 cm³
2800 U/min
3,0 kW / 4,1 HP
free max. 5% bioethanol
1,3 l
SAE 30 / 10W30
0,35 l
25-75 mm / 7-stages
55 l
46 cm
28,8 kg
2
GB | 25