Haier HMV1640 Instructions D'installation page 28

4. Insert a self-aligning screw through top center cabinet hole. Temporarily secure
the oven by turning the screw at least two full turns after the threads have
engaged. (It will be completely tightened later.) Be sure to keep power cord tight.
Be careful not to pinch the cord, especially when mounting flush to bottom of
cabinet.
a
b
f
5. Attach the microwave oven to the overhead cabinet.
6. Insert two self-aligning screws through the outer top cabinet holes. Turn two full
turns on each screw.
7. Tighten center screw completely.
8. Tighten the outer two screws to the top of the microwave oven. (While
tightening screws, hold the microwave oven in place against the wall and the top
cabinet).
INSTALL GREASE FILTERS
See the User Manual, packed with the microwave.
26
a
c
b
c
d
d
e
e
f
Cabinet Front
Cabinet Bottom Shelf
Filler Block
Equivalent to Depth
of Cabinet Recess
Self-Aligning Screw
Microwave Oven Top