MOOD KORSIKA Traduction Des Instructions D'origine page 88

14 – Overall width of the awning
The overall width is always stated from outer edge to outer edge, including all end covers.
15 – Fitting the brackets
The distance between the outer sides of the plates is L - 70 mm.
L = overall width of the awning
The outer edges of the awning suspension claws should be flush with the outer edges of the brackets.
Make sure you use suitable mounting material for the relevant mounting surface! This is NOT supplied with the
product. Drill deep enough and clean the drill holes thoroughly.
Do not drill through mortar (joints) as this does not provide the necessary grip!
Do not drill too close to the edge of the subsurface to avoid it breaking loose!
The fastening screws must not protrude too far forwards, otherwise they will press against the awning and the
awning cannot be attached correctly!
88
211021_MOOD_BDA Markisen_Korsika_RZ.indd 88 211021_MOOD_BDA Markisen_Korsika_RZ.indd 88 21.10.21 15:03 21.10.21 15:03