Proxxon COLT 2 Manuel D'utilisation page 6

Translation of the Original
GB
Operating Instructions
Operating instructions
Micromot Colt 2
Dear customer,
The Micromot Colt 2 which you
have just purchased is a handy,
compact, high-performance drill.
In order to operate the machine
safely and correctly, please read
the enclosed safety guidelines and
operating instructions carefully
before use.
Overview: (Fig. 1)
1. Drill chuck
2. Drill chuck key
3. Adaptor for drill stand
4. Switch with control function
5. Switch lock
Technical data:
Voltage
Power
Max. speed
Short-time duty
(at 100 watts)
Weight
Drill chuck
Noise emission
Vibration at handle
- 6 -
~230 V, 50/60Hz
100 W
3000/min
STD 15 min
approx. 700 g
0.5 to 6 mm
70 dB(A)
2.5 m/s
For use in dry environments
only
Protection class II device
Please do not dispose off the
machine!
Operation
Chucking and changing drill
Disconnect mains plug before
changing tool.
1. Drill chuck key 2 (Fig. 2)
Insert in drill chuck 1 and turn
drill chuck key in direction A to
open chuck.
2. Insert drill in drill chuck to stop
and turn in direction B to close
chuck.
3. Remove drill chuck key.
2
Important: