Publicité
IGNITION TIMING CHECK
7. Adjust:
Ignition timing
Adjustment steps:
Loosen the screws (stator) 1.
Align the punch mark on the rotor with
punch mark on stator 2 by moving the
stator.
Tighten the screws (stator).
5PA30900
8. Check:
Ignition timing
Re-check the ignition timing.
3 - 37
INSP
ADJ
Screw (stator):
8 Nm (0.8 m • kg, 5.8 ft • lb)
Publicité
