Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WARNING: Long-term exposure to
noise can result in permanent
hearing impairment. So always use
approved hearing protection.
•
Always wear approved eye protection. If you use
a visor then you must also wear approved
protective goggles. Approved protective goggles
must comply with the ANSI Z87.1 standard in the
USA or EN 166 in EU countries. Blows from
branches or objects that are thrown can damage
the eyes.
•
Wear sturdy, non-slip boots.
•
Always wear heavy, long pants, boots, gloves,
and a long-sleeve shirt. To reduce the risk of
injury associated with objects being drawn into
rotating parts, do not wear loose clothing,
scarves, jewelry, etc. Secure hair so it is above
shoulder level.
•
A breathing mask should be used when there is
a risk of dust.
•
Always have a first aid kit nearby.
Safety devices on the attachment
WARNING: Read the warning
instructions that follow before you use
the attachment.
1029 - 001 - 29.01.2019
This section contains the attachment's safety
features, its purpose and how checks and
maintenance should be carried out to ensure that it
operates correctly. See instructions under the
Attachment overview on page 2 to find
heading
where these parts are located on your attachment.
The life span of the attachment can be reduced and
the risk of accidents can increase if attachment
maintenance is not carried out correctly and if
service and/or repairs are not carried out
professionally. If you need further information please
contact your nearest servicing dealer.
WARNING: Never use an attachment
with defective safety components. The
attachment's safety equipment must be
inspected and maintained as described
in this section. If your attachment fails
any of these checks, contact your
service agent to get it repaired.
WARNING: All servicing and repair work
on the product requires special training.
This is especially true of the product's
safety equipment. If your product fails
any of the checks described below you
must contact your service agent. When
you buy any of our products we
guarantee the availability of professional
repairs and service. If the retailer who
sells your product is not a servicing
dealer, ask him for the address of your
nearest service agent.
To check the cutting attachment guard
WARNING: Do not use a cutting
attachment without an approved cutting
attachment guard. If an incorrect or
faulty cutting attachment guard is fitted
this can cause serious personal injury.
This cutting attachment guard is intended to prevent
loose objects from being thrown towards the
operator. The cutting attachment guard also protects
the operator from accidental contact with the blade.
•
Check that the cutting attachment guard is not
damaged. Replace the cutting attachment guard
if it has been exposed to impact or is cracked.
•
Only use original spare parts.
5
Publicité
Table des Matières
