Télécharger Imprimer la page

Vicks FilterFree V4600 Manuel D'utilisation Et D'entretien page 3

Masquer les pouces Voir aussi pour FilterFree V4600:

Publicité

Les langues disponibles

Les langues disponibles

Vicks
Filter Free Cool Mist Humidifier
®
How it Works:
The Vicks Filter Free Cool Mist Humidifier is designed to quietly provide visible cool moisture.
Water is released from the water tank into base where a small disk vibrates at a high
frequency to break the water into tiny droplets. A small, ultra quiet fan propels the droplets
into the air.
Carrying
Handle
Tank
Float
Scent Pad Door
Base
V4600 Accessories
The following optional accessories work great with your humidifier. These accessories can be
purchased at most major retailers or through Kaz.com.
Vicks VapoPads
Protec Demineralization
Cartridge, PDC-51 or
Up to 2 scent pads can be used
PDC51-CAN
in the V4600 to provide soothing
menthol (VSP-19 or VSP-19-CAN) or
Helps remove minerals from the
lavender/rosemary (VBR-5, US only)
water and prevent white dust.
vapors.
Best for areas with hard water
and if not using distilled water.
(one complimentary menthol scent
pad included with product)
4
(Model V4600)
Directional Mist
Outlet
Tank Cap
Night Light
Power Switch
Protec Cleaning Cartridge,
PC-1, PC-1C or PC-2
Helps keep your humidifier
cleaner, longer and continuously
cleans and protects humidifiers
against bacteria & mold. Keeps
cleaning for 30 days.
Setting Up Your Vicks 4600 Humidifier
Step 1
Step 2
1. Remove from box. Remove packaging material. Set aside instruction manual. Recycle
packaging materials or save for storage.
2. Remove twist tie from power cord and extend power cord full length.
DO NOT OPERATE WITH POWER CORD COILED OR TWIST TIE IN PLACE.
3. Select a firm, level location at least 6" (15cm) from any walls. Place the humidifier on a
water-resistant surface. Mist should be directed away from any walls, bedding or furniture.
Kaz will not accept responsibility for property damage caused by water spillage.
Filling / Refilling
NOTE: TANK SHOULD BE CARRIED USING TWO HANDS. ONE HAND USING CARRYING HANDLE LOCATED ON TANK
TOP AND OTHER HAND SHOULD SUPPORT THE BASE OF THE TANK.
Step 1
Step 2
1. Remove tank by grasping handle and pulling up. Remove tank cap located on bottom of tank.
2. Fill tank with cool water. Do not fill with warm or hot water.
3. Replace tank cap by firmly turning back in place. Place tank back on humidifier base.
Step 3
Step 3
5

Publicité

loading