Description - Shindaiwa DH2200ST Manuel D'utilisation

1. Cutting device That part of the assembly of cutter blade
and shear plate together with any supporting part, which
performs the cutting action.
2. Blunt extension An extending blunt part of the cutting
device. (Applicable to double edged blade unit)
3. Front handle Handle located on the cutting device.
4. Air cleaner cover Covers air filter.
5. Carburettor Device for mixing fuel and air in the correct
proportions.
6. Starter handle Pull handle to start the engine.
7. Fuel tank cap For closing the fuel tank.
8. Fuel tank Contains fuel and fuel filter.
9. Ignition switch Device for allowing the engine to be start-
ed and stopped.
10. Throttle trigger lockout Device that prevents the acci-
dental operation of the throttle trigger until manually re-
leased.

Description

11. Rear handle Handle located furthest from the cutting
device.
12. Rotation release lever Device to be lifted up for unlock-
ing the rear handle.
13. Throttle trigger Device activated by the operator's fin-
ger, for controlling the engine speed.
14. Throttle latch Device for temporality setting the throttle
in a partially open position to aid starting.
15. Gear housing Housing to support the gears that reduce
the speed of engine to cutting attachment.
16. Silencer cover Cover for the silencer to prevent opera-
tor contact with hot exhaust.
17. Guard Guard between the front handle and cutting de-
vice for protecting the hand from injuries if the hand slips
off the handle.
18. Blade cover When transporting or storing the product
always fit the blade cover.
13
Description