Table Des Matières - PLYMOVENT PERSONAL PRO Mode D'emploi

PERSONALPRO
ENGLISH
CE Approved to BS EN12941 : 1998
RESPIRATORY PROTECTIVE DEVICE - POWERED FILTERING
DEVICE, INCORPORATING A WELDING HELMET OR
IMPACT PROTECTIVE FACESHIELD, CLASS TH2P R SL
DEVICE
USER INSTRUCTION MANUAL
Important:
This manual must be read and fully understood before using the PersonalPro unit.
The manual must be retained for future reference.
Compulsory Information for the use of a powered respirator with Hood type head unit
Please read these instructions carefully before unpacking your PersonalPro product. Failure ta comply
with the instructions in this leaflet may void your warranty and adversely affect your health. If you have any
questions regarding the suitability of this product ta your task, please contact an occupational hygienist or
call the manufacturers technical help line.
Address and telephone number information is printed at the back off this leaflet.
Contents
1. Introduction
2. Approvals
3. Preconditions for use
4. System Overview
5. Unpacking / Assemblyi Usage
6. Before Use
7. Maintenance /Cleaning
8. Fault finding
9. Storage and transportation
10. List of Parts
11. Technical data
12. Warranty
1. Introduction:
PersonalPro is a respiratory protective system which is based on the principle of circulated over pressured
air in the hood. The belt-mounted blower unit delivers air through a lilter and via an air hose into a headpiece
(a hood or mask). The supply liltered air creates positive pressure inside the headpiece, which prevents the
external contaminated air lrom entering the user's breathing zone.
2.Approvals:
PersonalPro has been designed and manulactured to comply with EN12941: 1998 as a TH2P R SL device.
8S4275 (Guide to implementing an effective respiratory protective device program), which the user is
advised to read, defines an EN12941 TH2P R SL device as offering an Assigned Protection Factor of 20.
PersonalPro can only provide this level of protection when used with filters provided by the