Threaded Stud, #8-32 X 1-1/4; Knurled Knobs, #8 - Luminance Brands kathy ireland HOME GEODE Mode D'emploi

6.2
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the Ceiling Cover
Holes (Figure 28) .
Secure the Ceiling Cover in place by sliding a
Lockwasher over each of the Threaded Studs and
installing the two Knurled Knobs (supplied) (Figure 28) .
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod .
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.
1-1/4"
THREADED
STUD (2)
#8 EXTERNAL
TOOTH
LOCKWASHER (2)
Figure 28
17
CEILING
COVER
#8-32 KNURLED
KNOB (2)
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
ETL Model No.: CF370