Select the desired mode in the menu option "CALIBRATION"
Mode М (manual)
- Close the lens cover, press briefly the ON/OFF (1) button.
- Open the lens cover.
Mode SA (semi-automatic)
- Press briefly the ON/OFF (1) button to calibrate.
- You do not need to close the lens cover (the sensor is closed with the
internal shutter automatically).
Mode А (automatic)
- The device calibrates by itself according to the software algorithm
You do not need to close the lens cover (the sensor is closed with the
internal shutter automatically).
- In the automatic mode the user can calibrate the sensor with the
ON/OFF button.
10
DISCRETE DIGITAL ZOOM
The device allows you to quickly increase the basic magnification
(please refer to the
"Digital zoom"
times or four times
(XQ models) or
discrete digital zoom, press successively the
The digital zoom will not be saved after the device is re-started.
11
QUICK MENU FUNCTIONS
The Quick menu allows change of basic settings (display brightness and
contrast, inceremental digital zoom and stadiametric rangefinder).
Enter the menu with a short press of the М (3) button.
To toggle between the functions below, press successively the M
button.
Brightness
– press the UP(2)/DOWN(5) buttons to change
display brightness from 00 to 20.
Contrast
– press the UP/ DOWN buttons to change display
contrast from 00 to 20.
9
line in the specifications table) by two
8 times XP models). To operate the
(
DOWN (5)
button.
Digital zoom
- press the
zoom from 1.0x to 4.0x (or 8.0x in XP models).
zoom is in 0.1x increments.
The stadiametric rangefinder
to
measure distance
to an object being ranged (please refer to
respective section for more details).
Notes.
- actual magnification is the product of the basic magnification value
and continuous digital zoom value.
For example: the device's basic magnification is 3.
digital zoom value 1.7. Actual magnification is 5.
х
- display brightness and contrast settings are saved in the memory
when the unit is turned off.
- To exit quick menu, press and hold down the M button or wait 5 sec
for automatic exit.
12
MAIN MENU FUNCTIONS
Enter the main menu with a long press of the М (3) button.
Press the UP(2)/DOWN(5) buttons to switch between the menu
options.
Menu navigation is cyclical: as soon as the last menu option of the
first tab is reached, first menu option of the second tab starts.
Enter a menu option with a short press of the М button.
Exit the menu with a long press of the М button.
Automatic exit takes place in 10 sec of inactivity (buttons are not
pressed).
Upon exit from the menu the cursor location
the duration of the working session (i.e. until the unit is turned off).
Upon restarting the device and entering the menu the cursor will be
located on the first menu option.
UP/ DOWN
buttons to change digital
Incremental
digital
— press the
UP/ DOWN
buttons
1х
, continuous
2х
(3. *1.7).
1
is memorized only for
10