KROHNE OPTISONIC 4400 Manuel De Référence page 79

OPTISONIC 4400
No. Function
C4 I/O HART
C4 I/O HART
C4.1 PV is
C4.2 SV is
C4.3 TV is
C4.4 4V is
C4.5 HART Units
C4._.1 Current Output X
C4._.1 Frequency Output X
C4._.1 HART Dynamic Var.
09/2016 - 4005365501 - HB OPTISONIC 4400 R01 -fr-
Settings / descriptions
Selection or display of the 4 dynamic variables (DV) for HART
®
The HART current output (terminal A basic I/Os ) always has a fixed link to the primary
variables (PV). Fixed links of the other DVs (1-3) are only possible if additional analogue
outputs (current and frequency output) are available; if not, the measurement can be
freely selected from the following list: in Fct. A4.1 "Measurement"
_ stands for 1, 2, 3 or 4 , X stands for connection terminals A...D
Current output (primary variable)
(secondary variable)
(tertiary variable)
(4th variable)
Changes units of DVs (dynamic variables) in the display
Break: return with ^ key
®
HART display: copies the settings for the display units to the settings for DVs
Standard: factory settings for DVs
Shows the current analog measured value of the linked current output. The
measurement cannot be changed!
Shows the current analog measured value of the linked frequency output, if present.
The measurement cannot be changed!
Measurements of the dynamic variables for HART
Select: Volume Flow / Mass Flow / Diagnosis / Velocity /
Totaliser 1 / Totaliser 2 / Totaliser 3 / Operating Hours
www.krohne.com
PROGRAMMATION
®
®
.
6
79