LaserLiner ThermoSpot Pocket Mode D'emploi page 6

Completely read through the operating instructions, the
„Warranty and Additional Information" booklet as well as
!
the latest information under the internet link at the end of
these instructions. Follow the instructions they contain.
This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
The ThermoSpot Pocket is a contactless infrared temperature
measuring device with integrated laser. Non-contact temperature
measurement of surfaces is realised by measuring and evaluating the
amount of electromagnetic energy in the infrared wavelength range.
General safety instructions
– The device must only be used in accordance with its
intendedpurpose and within the scope of the specifications.
– The measuring tools and accessories are not toys.
Keep out of reach of children.
– Modifications or changes to the device are not permitted,
this will otherwise invalidate the approval and safety specifications.
– Do not expose the device to mechanical stress,
extreme temperatures, moisture or significant vibration.
– The device must no longer be used if one or more of its functions
fail or the battery charge is weak.
– Please ensure compliance with the safety regulations set out by
local and national authorities with regard to the correct and
proper use of the device.
Safety instructions
Using class 2 lasers
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifyingglass, microscope, binoculars)
– Do not use the laser at eye level (1.40...1.90 m).
– Tampering with (making changes to) the laser device is not permitted.
06
EN
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 650 nm
EN 60825-1:2014/AC:2017