INNOBIZ INNO PRO 4 Mode D'emploi page 22

General Instructions
6. User-defined concentration settings
(1) Press the " " button three times, the screen will show the same things as
in image 1.
(2) Press the " " button to get to the user-defined concentration settings
interface, the cursor will blink on level "1" concentration.
(3) Press the " " button to alter the concentra-
tion levels; the operation and pause periods of the
relevant concentration will also change.
(4). Press on " " once to go to operation time
and concentration level settings; the spray icon will
light up.
(5) Press " " and "
(6) Once the operating period has been set, press the "
the cursor to the pause time, press "
then press the "
screen.
22
" to modify the numbers.
" button to save the new settings and go back to the main
" button to move
" and " " to finish up the settings,
en
Image 1