INNOBIZ INNO PRO 4 Mode D'emploi page 21

General Instructions
en
(2) The concentration of the device is divided into two parts: real time concen-
tration and programmed concentration. When the device is in normal use,
you just have to press the " " button to change the real time concentration
settings. But real time concentration only applies until 11:59 pm and is automa-
tically cancelled after any operation.
(3) Programmed concentration applies to each day of programmed operation.
Once the settings have been made, the following days will reproduce the new
settings.
(4) Once the operation time and concentration settings have been successfully
made for Mondays, the settings for the following days will be the same as those
for Monday. However, if you enter in different settings for another day of the
week, this will not affect the operating status for the other days.
5. Local time settings
(1). From the normal activity interface, push " " twice to get to the local time
interface
(2). Push the " " button to get to the local time interface - the time will blink.
(3) Press on " " and " " at the same time to adjust the hour, minutes, year,
month, and day.
(4) Press the " " button to save the settings and return to the main interface.
21