Connection Of Remote Version Connecting Cable; Service Adapter; Device Fuse; Cable Entries - Endress+Hauser Proline Promass 83 Consignes De Sécurité

Proline Promass 83 MODBUS RS485
Connection of remote
version connecting cable

Service adapter

Device fuse

Cable entries

Endress+Hauser
Connection of connection housing after transmitter:
A
Esc
- + E
a
B
Fig. 3: Connection of connecting cable (remote version)
A Transmitter remote version
B Remote version connection housing
a Sensor cable
The service adapter is exclusively for connection to Endress+Hauser approved service interfaces.
#
Warning!
It is not permissible to connect the service adapter in explosive atmospheres.
#
Warning!
Use only fuses of the following types; the fuses are installed on the power supply board:
• Voltage 20...55 V AC / 16...62 V DC: fuse 2.0 A slow-blow, disconnect capacity 1500 A
(Schurter, 0001.2503 or Wickmann, Standard Type 181 2.0 A)
• Voltage 85...260 V AC: fuse 0.8 A slow-blow, disconnect capacity 1500 A
(Schurter, 0001.2507 or Wickmann, Standard Type 181 0.8 A)
Number reference for Figure on Page 16 and Page 17:
m Cable entries for the transmitter terminal compartment (EEx d version)
Power supply/circuit cable: (Promass 83***-******B/C/3/4*****)
Choice of thread for cable entries, M20x1.5 or ½" NPT or G ½" thread.
Make sure that the EEx d cable glands/entries are secured to prevent working loose
and that the seals are installed immediately adjacent to the housing.
m Cable entries for the transmitter terminal compartment (EEx e version)
Power supply/circuit cable: (Promass 83***-******D/E/5/6*****)
Choice of cable gland M20x1.5 or thread for cable entry, ½" NPT, G ½" thread or 13.5 conduit thread.
n
Cable entries for the transmitter terminal compartment (EEx ia)
o
Sensor cable connection:
Choice of cable gland M20x1.5 or thread for cable entry, ½" NPT, G ½" thread or 13.5 conduit thread.
!
Note!
For the MODBUS RS485 option, is it advisable to use the system components (plug-and-sachet connection)
from the Company BARTEC.
Pipe
S1 S1 S2 S2 TM TM TT TT
GND
+ + + +
5 6 8 9 10
4 7 11 12
4 5 6 7 8 9 10 11 12
+ + + +
Pipe
S1 S1 S2 S2
TM TM TT TT
GND
0
<
41 42
41 42
A0001331-EN
23