Error Messages - Giropes Baxtran ABD Manuel D'utilisateur

DISPLAY
LF 7
-00-
9.8035
9.8035
INITIAL ZERO
SEtZ Y resets of the point of zero every time that the scale is begun again.
SEtZ n resets of the point zero OFF
DISPLAY
LF 8
SetZ Y
LF 8

10. ERROR MESSAGES

MESSAGE
Err H
Z Err
Err 1
• Press the key to continue or the key
automatically.
• The screen is going to show the number of pre-calibration during one second.
• Press the key to continue.
• Use the keys ,
( press ESC to exit from the configuration and go back to the menu LF7)
LF 8
• Press the key to start or the key
automatically.
• Use the key and then press the key
Key to exit of the configuration and go back to menu LF8)
• Use the keys ,
key to exit from the menu and the scale will start again automatically.
DESCRIPTION
lnitial zero too high (over 10% of max. cap).
lnitial zero too high (over 10% of max. cap).
Initial zero too high (approved model).
DESCRIPTION AND SEQUENCE OF USE
to exit from the menu and the scale will start again
0 ~ 9
and , and then the key
DESCRIPTION AND SEQUENCE OF USE
to exit from the menu and the scale will start again
to choose the initial zero mode. (Press the
and then the key to continue with other adjustments o press the
USER'S MANUAL ABD
to introduce the value of gravity
EN EN
43