Philips HF367X Serie Manuel page 14

English
16
Time
Wi-Fi
Audio feedback
Display
You can change the time and switch between a 12-hour clock
(AM/PM) and a 24-hour clock by pressing on the toggle icon (12/24).
Note: This option is not available when the appliance is connected to
Wi-Fi.
Turn Wi-Fi on or off by pressing on the Wi-Fi icon. When Wi-Fi is
disabled, the main display shows this icon in the upper right corner
Any updates made in the app will not be implemented until the Wi-Fi
connection is restored.
Note: Press and hold the Wi-Fi icon for approximately 8 seconds to
return to access point mode. Open access point mode when you want
to connect your appliance to a different Wi-Fi network or if you have
changed your Wi-Fi password.
If you accidentally activated access point mode, press the Wi-Fi icon
in the Wi-Fi menu twice to activate Wi-Fi again. Your connected Sleep
& Wake-Up Light remembers the network you were connected to.
If you do not want to hear clicks when you press an icon, press the
audio feedback icon to turn off the audio feedback. You hear one click
as a confirmation. To reactivate the audio feedback, press this icon
Display brightness
You can adjust the display brightness from level 1 to level 6. We advise
you to set the display contrast in a dark bedroom. Choose a contrast
level that is optimal for you to see the display at night. The display
contrast will increase to a higher level when the connected Sleep &
Wake-up Light measures a lot of light in the bedroom. This happens
automatically, so you will always be able to see the display, even
when the surroundings are lighter.
.
.