Hitachi YUTAKI S80 Serie Manuel D'instructions page 10

INDOOR UNIT - UNIDAD INTERIOR - INNENGERÄT - UNITÉ INTÉRIEURE - UNITÀ INTERNA -
UNIDADE INTERIOR - INDENDØRSENHED - BINNENUNIT - INOMHUSENHET - ΕΣΩΤΕΡΙΚΗ ΜΟΝΑ∆Α - ВЪТРЕШНО ТЯЛО -
VNITŘNÍ JEDNOTKA - BELTÉRI EGYSÉG - VIDINIS ELEMENTAS - JEDNOSTKA WEWNĘTRZNA - UNITATE INTERIOARĂ -
( )(
1~ 230V 50Hz
Unit
RWH-4.0VNFE
RWH-5.0VNFE
RWH-6.0VNFE
YUTAKI S80 DHW Tank - Depósito de DHW - DHW-Speicher -
Réservoir d'DHW - Serbatoio DHW - Depósito de DHW - DHW
beholder - Warmwaterketel - Tappvarmvattentank -
Δεξαμενή DHW - Резервоар YUTAKI S80 за БГВ -
Zásobník TUV YUTAKI S80 - YUTAKI S80 HMV-tartály -
YUTAKI S80 DHW talpa - Zbiornik CWU YUTAKI S80 -
Rezervor ACM YUTAKI S80 - Zásobník TÚV YUTAKI S80 -
Бак ГВП YUTAKI S80 DHW -
Unit
DHWS200S-2.7H2E
?
N O T E
• In "TYPE 1: Version for operation in DHW but with a remote tank", the required unit controller (PC-ARFHE) has to be ordered as ac-
cessory.
• In "TYPE 2: Version for operation with Hitachi DHW tank", the domestic hot water tank of model DHWS200S-2.7H2E and DHWS260S-
2.7H2E is required. The DHWT has to be ordered separately. The unit controller (PC-ARFHE) is factory-supplied with the DHWT
(integrated in the font cover). The tank can be installed in 2 ways: on top of the indoor unit (integrated installation) or next to it. In this
second case, the specific accessory kit for installation (ATW-FWP-02, ordered as an accessory) is required.
• Icons between brackets mean possible extra operations to the factory-supplied operations.
VNÚTONÁ JEDNOTKA - ВНУТРІШНІЙ БЛОК -
SPLIT AIR TO WATER HEAT PUMP MODELS
) ( ) ( )
TYPE 1
3N~ 400V 50Hz
Unit
RWH-4.0NFE
RWH-5.0NFE
RWH-6.0NFE
1~ 230V 50Hz
Unit
DHWS260S-2.7H2E
(
TYPE 2
1~ 230V 50Hz
Unit
RWH-4.0VNFWE
RWH-5.0VNFWE
RWH-6.0VNFWE
)( ) ( )
3N~ 400V 50Hz
Unit
RWH-4.0NFWE
RWH-5.0NFWE
RWH-6.0NFWE