Briteq LDP ACCUSPOT 7TC Mode D'emploi page 3

ENGLISH
OPERATION MANUAL
Thank you for buying this BRITEQ
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 This device was designed to produce decorative effect lighting and is used in light show systems.
 Battery operated LED-projector, based on 7 RGB-LEDs to avoid unwanted color shadows.
 Beam angle = 25° (medium spot)
 Projection angle can be adjusted over 90° (vertical to horizontal)
 The perfect solution for many applications: exhibition booths, parties, special events, ...
 Minimum 10hrs at full output on a fully charged battery
 Each projector can be equipped with an optional "G4 W-DMX wireless DMX-module" or you can go for the
cost effective solution: only use wireless DMX on the first unit and connect the other units via DMX-cable.
 The optional Wireless W-DMX module uses a new compact antenna: no more broken antennas anymore!
 Projector can still be used with empty battery: just connect it to the mains!
 Very smooth RGB color changes thanks to high freq. dimming electronics
 The internal battery charger charges the battery while the projector is working on mains power.
 Optional covers available:
 The unit is delivered in black color but can be equipped with special optional white covers to adapt it to
the environment it will be used in.
 The optional covers protect the projectors against rain (IP43) so they can be used outdoor to light up
trees, plants, walkways, ...
 Different working modes:
 Standalone: custom colors selectable or automatic and beat synchronized color changes
 Master/slave mode: up to 16 units can be used together for wonderful preprogrammed, music
synchronized lightshows.
 DMX-controlled, also wireless: 5modes, 4channels (R, G, B + Dimmer/strobe/sound chase/color
macros) and 5channels (R, G, B, master dimmer, color macros, strobe channel)
 Controlled by a small JBS LEDCON-02 controller
 IEC mains in/outputs: easy daisy chaining of several units (if needed).
 Optional flight case available
Note: For logistical reasons (different regulations for battery recycling in EU-countries) the battery is not
included! The LDP-ACCUSPOT uses a standard rechargeable lead/acid battery that can be easily obtained
from your local battery specialist or from major online suppliers all over Europe. In this manual you will find
some links to online stores where you can buy this battery.
BEFORE USE
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the packing contains the following items:
 Operating instructions
 LDP-ACCUSPOT 7TC (without battery)
 IEC mains cable
BRITEQ
®
®
product. To take full advantage of all possibilities and for your own
1/69
USER MANUAL
LDP-ACCUSPOT 7TC