Briteq LDP ACCUSPOT 7TC Mode D'emploi page 14

ENGLISH
Channel mode 5:
MAINTENANCE
 Switch off the unit and unplug the mains cable.
During inspection the following points should be checked:
 When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
 BATTERY maintenance: We strongly advice to follow the maintenance requirements imposed by the
battery reseller. On top of that you should at least every 6 months:
 Do a visual check of the battery: cleanness, terminal damage, any damage of the housing, ...
 Check the if the poles of the battery are still well tightened to the wires.
 ...
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
RECYCLING OF USED BATTERIES:
dangerous waste. Each country has its own regulations for the recycling of used rechargeable
batteries: check the local regulations in your country or ask your battery vendor for more information
on recycling of the used rechargeable batteries!
BRITEQ
®
used lead/acid batteries should be considered and handled as
12/69
USER MANUAL
LDP-ACCUSPOT 7TC