Install Appliance; Mount To Cabinet; Connect Electrical Supply - Gaggenau BX 480 Notice De Montage

en-us
Preparing Kitchen Units

Install Appliance

Note: The appliance is heavy. It is advisable to install it
with a second person.
NOTICE
Before installing the appliance, be sure to verify the
cabinet dimensions and electrical connections.

Mount to Cabinet

Important: Take into account the weight of the double
▯
oven (approx. 330 lbs/150 kg with accessories).
Transport the appliance in an upright position.
If there is no fitted shelf above the appliance, secure
▯
the appliance against tipping over when the door is
opened. Fit two standard angles
the appliance at 17 /
3
cabinet.
1.
Do not kink or trap the connecting cable, or route it
over sharp edges.
2.
Centre the appliance.
There must be an air gap of
appliance and adjacent cabinets.
3.
Using a spirit level, adjust the appliance so that it is
perfectly level.
8
/ " (5 mm) above
3
16
" (450 mm) depth inside the
4
3 / " (5 mm) between the
16
4.
Screw the appliance into place. Remove the transport
lock from the door.

Connect Electrical Supply

9
CAUTION
Local Codes may vary; installation, electrical
connections and grounding must comply with all
applicable local codes.
1.
Connect red wire from oven to red electrical supply
wire (hot wire).
2.
Connect black wire from oven to black electrical
supply wire (hot wire).