StarLab ErgoOne FAST Mode D'emploi page 21

5.5 Aspirating liquid
The speed of aspirating liquid is adjusted steplessly. For this the control knob is pressed at
different depths.
NOTICE! Damage to device due to missing or damaged membrane filter.
› D o not use the pipette controller if the membrane filter is not inserted.
› R eplace the membrane filter if it is damaged.
Consider the type of pipette used.
Fig. 6: Aspirating liquid
1. Immerse the pipette into the liquid.
2. S lowly press the aspirating button
and keep it pressed down.
The further the aspirating button is
pressed, the quicker the liquid will
be aspirated.
3. W ipe the pipette on the tube inner
wall and remove it.
ErgoOne FAST · Manual · 21
®