Desoutter HM-02 Mode D'emploi page 3

HM-02
E™
Desoutter Limited.
STATEMENT OF USE
This motor is designed to be incorporated into a fixed or moving
machine.
II is for righl hand rotation and should be mounted by Iha threaded
nose only. The risk of the motors being the source of ignition of a
potentially explosive atmosphere is extremely small.
The user is responsible for assessing the risks associated with
the whole machine into which the motor is to be incorporated.
GENERAL
Recommended inlet hose
Lubrication
Correct lubrication is vita.I for the maximum
performance
of the tool
and an airtine lubricator should be fitted in the system down line of
Iha filler. Use ISO VG 15.
158733 = Molycote PG75
208893
=
Rocol M204G
273273
=
BP 05618
DATA
Maximum air pressure Pmax
Minimum air pressure Pmin
Sound Pressure Level (dBA)
Vibration Level (m/sec')
Weight
273283 = BP FGOOEP
27652 = ISO VG 15
6.3 bar
2 bar
82 re. CAGl-PNEUROP
Test code
< 2.5 re. ISO 8662
HM-02-340 = 1.6 kg
HM-02-soo = 1.6kg
HM-02-830 = 1.6kg
ACCESSORIES .
A
range of accessories are
available and suitable items should be
selected from the Desoutter catalogue.
Printed in England
@)
To Assemble; Motor complete, refer to main Hlustration
0 ... _
I Pl
MAINTENANCE INSTRUCTIONS
1. Servicing should be carried out at intervals of 1000 hours' use.
2. All torque figures± 10o/o.
3.
Replace as necessary
all '0'
rings, bearings and rotor blades,
see service kit.
4.
Oi
Indicates direction of dismantling.
5. Whan disposing of components, lubricants, etc, ensure that the
relevant safety procedures are carried out.
3 of14
END CAP TO BE PRESSED INTO
BEARING HOUSING IN DIRECTION OF
ARROW 'A' TO DIMENSION SHOWN
THIS DIMENSION TO APPLY
AFTER BEARING IS PRESSED
ONTO ROTOR
•
0 .040
-------l
l-_
0.025----, , - -
©Copyright 1995, Desoutter, London NW9 &ND, UK.
All rights reserved. Any unauthorized use or copying of !he
contents or part thereof is prohibited. This applies in particular
to trademarks, model denominations, part numbers and
drawings.
Use only authorized parts. Any damage or malfunction caused
by the
use
of unauthorized parts is not covered by Warranty
or
Product Liability.
Part No. 393873 Issue 1 7. 95