The Essential remote has 3 Activity modes,
specifically Watch TV, Listen To Music and Watch Movie.
Each of these modes has a choice of devices to combine.
These are:
If you set the default devices for any Activity on the remote (for
example a TV, STB and Audio for Watch TV) that Activity will be set up
automatically on the remote.
If you would like to change to a different combination, the procedure
is as follows:
1.
2.
3.
4.
To access the Activities, simply press the ACTIVITY key. You can return
to controlling by device by using any Device key.
713142_(EU5)_URC3661_ESSENTIAL_6_Antimicrobial_RDN1290721.indd 12
713142_(EU5)_URC3661_ESSENTIAL_6_Antimicrobial_RDN1290721.indd 12
Watch TV
Combination 1 – TV + STB + AUDIO (default)
Combination 2 – TV + STB
Combination 3 – TV + AUDIO
Listen To Music
Combination 1 – TV + BLU + AUDIO (default)
Combination 3 – TV + STREAM + AUDIO
Combination 5 – AUDIO only
Watch Movie
Combination 1 – TV + STREAM + AUDIO (default)
Combination 2 – TV + STREAM
Combination 3 – TV + BLU
Combination 4 – TV + BLU + AUDIO
Hold down Setup key until the LED under the
device blinks twice. The LED under the current
device will stay lit.
Press the Activity key you want to set up (e.g.
Watch TV).
Press the number of the combination you want
to set – e.g 3 For TV + AUD in Watch TV.
The LED will blink twice and go out.
12
29-07-2021 11:49
29-07-2021 11:49