To use my alarm remotely (central unit connected to the Internet)
4
Go to the Home page:
To use my alarm locally
5
Fully arming the alarm
Press
.
➔
Enter the code or place the badge on the reception area:
➔
2 long BEEPs will be heard.
3 short BEEPs indicate a fault.
Arming the alarm in night mode
Press
.
➔
Enter the user code 1 or place the badge on the reception
➔
area: 2 long BEEPs will be heard.
Only the opening detectors and outdoor movement detectors are armed by default,
unless other settings have been made.
Disarming the alarm
Press
.
➔
Enter the user code 1 or place the badge on the reception
➔
area: 1 long BEEP will be heard.
Sending an SOS
From a 2-key remote control, press and hold the ON key
➔
for 5 seconds, or
From a 5-key remote control, press and hold the SOS key
➔
for 5 seconds.
OR
➔
OR
➔
OR
➔
OR