Leica PINMASTER Notice D'utilisation page 24

EN
FITTING THE CARRYING CORD
Push the smaller loop through the eyelet (4) on the
housing of the Leica Pinmaster. Then, thread the
longer loop through the smaller loop and pull it tight so
that the carrying cord is securely attached to the
eyelet.
20
Open
Close
INSERTING AND CHANGING THE BATTERY
The Leica Pinmaster is supplied with power by one 3
Volt lithium cell (e.g. Duracell DL CR 2, Ucar CR 2,
Varta CR 2, or other CR 2 types).
1. Open the battery compartment (7) cover (6) by
turning it anticlockwise.
2. Insert the battery with its positive contact facing
forwards (as marked in the battery compartment).
3. Close the cover again by turning it clockwise.