Ivoclar Vivadent Astropol Mode D'emploi page 2

Side effects
None known to date.
Application
– 1 st Step: Finishing with Astropol F (grey)
With the Astropol F finisher, excesses are
removed and a smooth surface can be achieved.
– 2 nd Step: Polishing with Astropol P (green)
Polishing with Astropol P results in a very
delicate surface finish.
– 3 rd Step: High gloss polishing with
Astropol HP (pink)
With the microfine Astropol HP diamond finisher,
a high gloss can be achieved quickly and easily.
Do not apply pressure.
Important notes
– Recommended speed: 7500–10'000 rpm
– Use in conjunction with a water spray
– Avoid excess heat development
– Astropol is autoclavable up to 135°C / 275 °F.
– Polishing pastes are not necessary
Warning
Do not inhale grinding dust.
Storage
– Store Astropol at 2–28 °C (36–82 °F)
– Shelf life: see date of expiration
– Do not use Astropol after the indicated date of
expiration
Store out of the reach of children.
For use in dentistry only.
Date information prepared: 02/2006
Rev. 1
Ivoclar Vivadent AG
FL-9494 Schaan/Liechtenstein
This product has been developed solely for use in dentistry. It should
be used strictly according to the Instructions for Use. Liability cannot
be accepted for damages resulting from failure to observe the
Instructions or the stipulated area of application. The user is
responsible for testing the material for its suitability and use for any
purpose not explicitly stated in the Instructions. Descriptions and
data constitute no warranty of attributes and are not binding.