Kodak SMILE Guide De L'utilisateur page 7

photos!
1. Open the paper tray in the back by
pressing down on the latch and pulling it
toward you.
2. Place the blue calibration sheet in the tray
with the barcode facing down. Place the
other plain sheets on top, with the glossy
side facing you. Try to avoid touching the
12 | EN
glossy side to prevent getting fingerprints
on the paper.
3. When you print your first photo after loading
the ZINK® paper, the blue calibration sheet
will be slowly ejected from the printing slot.
4. Your photo will print after the calibration
sheet finishes.
Note: Only KODAK ZINK paper will work
in your KODAK SMILE camera. Other
branded papers are not compatible.
Power it On/Off
To turn the camera on, slide the ridged panel
away from the center. This will expose the
navigation panel, camera lens, and flash, and
the LCD screen on the back will light up. The
camera will also beep a musical tune to let you
know it is powered on.
To turn the camera off, simply slide the panel
back toward the center.
Insert a MicroSD™ Card
EN | 13