Kodak SMILE Guide De L'utilisateur page 13

2. Use the arrows to choose either internal
memory or microSD™ card, then press
the OK button.
3. Use the arrows to find the photo you want
to print.
4. OPTIONAL: To edit the photo further
press the OK button, and then use the
arrows to select filter (add a filter), and/or
border (add a border).
5. Press the print button.
6. Use the arrow keys to increase/decrease
the number of copies to print out.
24 | EN
7. Press the OK button to confirm.
8. Wait for the photo(s) to print.
After Taking a Photo
1. Press the Print button.
2. Use the arrow keys to increase/decrease
the number of copies to print out.
3. Press OK to confirm.
4. Wait for the photo to print.
TRANSFER PHOTOS TO
YOUR COMPUTER
If you have a microSD™ card installed in
your KODAK SMILE camera, you can easily
download and view higher-resolution copies
of your photos from any laptop or personal
computer. Follow these steps to access
and save your photos from your computer/
laptop.
1. Plug the USB connector end of your
charging cable into any USB port on your
computer (or laptop). Plug the micro USB
connector into the charging port of your
camera.
2. Slide open the camera to power it on.
3. The first time you connect your camera, it
will take a few minutes to automatically
download the drivers and recognize the
camera as an external storage device. Do
not disconnect your camera during this
process.
4. After the camera is plugged in and drivers
have been installed, you can access the
EN | 25