BIG ASS FANS es6 Mode D'emploi page 6

2. Install lower safety cable and ground wire
Install safety cable and ground wire lugs with unpainted screws and lock washers
(Fig. 2.1).
Fig. 2.1
Ground Wire (Green)
Safety Cable
Screw
Lock
Washer
3. Install uplight (optional)
Skip this step if you are not installing the uplight.
Make sure wiring harnesses are as close to downrod as possible so that they do not
interfere with uplight installation (Fig. 3.1).
Fig. 3.1
2
REV. A | 08/30/2021