Publicité
Les langues disponibles
Les langues disponibles
9. Wire fan
Disconnect power to fan location before wiring fan.
Wire fan as shown using the wire connectors (Fig. 9). Attach green ground wire to
mounting bracket with the unpainted screw. Connect wiring harness from power supply
to wiring harness from downrod, making sure that the wiring and safety cable are routed
in the same direction.
Carefully tuck wiring into outlet box or building structure. Ensure wire connectors are
turned upward and that wires are spread apart with grounded conductors on one side
of the outlet box/mounting structure and ungrounded conductors on the other side.
Fig. 9
AC HOT/L1
BLUE
EMI Filter
Power Supply
Supply Power Wire Color Chart
AC Hot/L1
Brown
AC Neutral/L2
Blue
PE/Earth Ground
Green with Yellow
© 2021 DELTA T LLC Ι ALL RIGHTS RESERVED.
RED
North America 100–120 V
Black
White
Green or Bare Copper
AC NEUTRAL/
L2
PE/EARTH
GROUND
BROWN
Wiring Harnesses
Australia
Brown or Red
Black or Light Blue
Green with Yellow Green with Yellow
Wire Connector
GREEN &
YELLOW
Mounting Bracket
Safety
Cable
All other regions
Brown
Blue
7
Publicité
