Components; Assembling - Sonnenkonig VICTORIA Mode D'emploi

2 Components

air outlet
LED Display
Control Panel
Foot

3 Assembling

Figure 1
• Remove the chassis lock from the bottom of the fuselage. (Figure 1)
• Align the bottom of the machine with the center hole of the chassis, attach the chassis to the
body, and fi nally lock the nut. (Figure 2)
• Note: When installing the chassis, place the machine upside down on the packaging foam or
other soft surface to avoid scratching.
Air inlet
Figure 2
35
Lock Nut
Base
Center Hole
EN