Pedestrian opening
Activating the pedestrian opening
Button 1 on 2- or 4-button remote controls cannot be programmed to control pedestrian opening.
See "Programming the remote controls", page 15, for more information.
Press the
button on the control electronics for 2
1
seconds.
The indicator light
comes on.
Position the remote control on the control electronics
2
target.
Press button 2 on the remote control.
3
The "RADIO" and
indicator lights come on then go
out. Pedestrian opening is activated on this button.
Move away from the control electronics when testing
the pedestrian opening.
Deactivating the pedestrian opening
Repeat the "Activate pedestrian opening" procedure using the button for which the pedestrian opening must be deactivated. The indicator light
comes on then goes out. The pedestrian opening is deactivated on this button.
1
2
>2s
3
<0,5s