Télécharger Imprimer la page

Steinbach Poolrunner Battery+ Notice Originale page 22

Masquer les pouces Voir aussi pour Poolrunner Battery+:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 30
Preparation
Charging the rechargeable battery
matching connectors (groove direction),
vertically aligned, same view direction
Charging at a temperature below 10 °C leads to chemical damage to the cell and can cause a
fire.
- Charge the rechargeable battery at room temperature.
Charging process
1
1. Switch off the device before charging.
2. Take the protective cap
3. Connect the charger to the device.
4. Plug the charger into a socket.
The charge control indicator is lit red. The rechargeable battery is charging.
5. When the charge control indicator is lit green, disconnect the charger from the power supply and
the device.
6. Attach the protective cap
The rechargeable battery is charged.
Basic settings
Adjusting the nozzles
The following settings are recommendations. Adapt the basic settings to the actual properties of your
pool.
0°/30°: for most pools
0°/40°: to cover a large cleaning area
20°/20°: for round pools
22
WARNING!
Risk of fire!
off the charging plug
1
11
to the charging plug
1
11
2
.
.
3
1
11

Publicité

loading